Fence, wall or gate in Wolverhampton: Planning Permission Guide
Your guide to fences, walls, and gates in Wolverhampton — height limits, permitted development rules, and costs.
Check if your fence, wall or gate qualifiesFence, wall or gates in Wolverhampton at a glance
application fee
weeks typical
381 listed buildings recorded. Green Belt land covers parts of the borough.
Want your personalised odds?
Approval probability, 5 nearest comparables, refusal reasons — for your specific address.
Recent fence, wall or gate decisions in Wolverhampton
The 5 most recent decided applications. Addresses redacted to postcode area.
Rear single storey Kitchen extension maximum rearward projection beyond the wall of the 'original' dwellinghouse 6.0m, maximum height: 3.…
Erection of new 1.46 m high boundary wall and railings and sliding entrance gates to front and 1.5 m high grey composite fencing to both …
02/2/32 (A1)Golden Cypress trees that have formed a hedgeRear Boundary hedge:- Reduce height of hedge by approximately 3-4m and trim back…
The trees are located behind our boundary fence and the rear garden fences of neighbouring residents (see Photo TFT 10) and are not activ…
Erection of low roadside wall to existing car park
These are borough-wide. See the 5 nearest to your address.
Get my report — £9Permitted Development Rules
Gates, fences, walls or other means of enclosure
GPDO 2015, Schedule 2, Part 2, Class A
Fences, walls, and gates are covered by Part 2, Class A of the GPDO. The main consideration is height: up to 1 metre next to a highway, up to 2 metres elsewhere.
Key dimension limits
These are the maximum GPDO limits for a detached house with no constraints. Your actual limits depend on your property type, location, and any planning restrictions.
Enter your postcode to see the personalised limits for your fence, wall or gate.
Check my limitsTypical Costs in West Midlands
Boundary treatment costs depend on the length, material, and type — timber fencing is cheapest, brick walls are the most expensive.
Typical total
Typically includes
Typically excludes
Timber fencing is cheapest. Brick walls and metal railings cost significantly more per metre.
Get a personalised cost estimate based on your actual fence, wall or gate dimensions.
Get my estimateWhich Professionals Do You Need?
Boundary treatments rarely need professional services beyond a competent builder or fencing contractor.
This project is unlikely to need specialist professional services beyond a competent builder.
This type of project does not typically require architectural services.
This guidance is based on a typical semi-detached house with no special constraints. Listed buildings, conservation areas, and attached properties may require additional professional input.
Find out exactly which professionals you need for your fence, wall or gate.
Get personalised guidanceConservation Areas & Listed Buildings
In conservation areas, the same height rules apply, but you should consider materials that are sympathetic to the area character. Some Article 4 Directions restrict boundary treatments.
Properties in conservation areas often have reduced permitted development rights. Some project types (like side extensions) lose PD rights entirely. An Article 4 Direction can remove additional PD rights.
Listed buildings (Grade I, II*, or II) have no permitted development rights at all. Any external alteration requires Listed Building Consent in addition to any planning permission. An architect experienced in heritage work is essential.
Check if your property is in a conservation area or has other planning constraints.
Check my propertyFrequently Asked Questions
Just want a quick yes/no for your fence, wall or gate?
Run our free 2-minute check to see whether your project likely qualifies as permitted development in Wolverhampton. For personalised approval odds and nearby comparables, get the full report above.
Free 2-min check