Wraparound extension in Southwark: Planning Permission Guide
Your guide to wraparound extensions in Southwark — combining rear and side extensions under one project.
Based on 28 decided applications in Southwark over 12 months (28 granted, 0 refused).
Southwark has numerous conservation areas including Borough, Bermondsey, Dulwich Village, Herne Hill, and Peckham Rye. Dulwich Village has a unique Dulwich Estate Scheme of Management layering private controls over standard planning. Article 4 Directions cover many Victorian terraces. Listed buildings are concentrated along the Thames frontage and around Southwark Cathedral. Flood zones apply near the river.
Recent wraparound extension decisions in Southwark
The 5 most recent decided applications. Addresses redacted to postcode area.
Construction for a rear and side wrap around ground floor extension
Replacement of all existing single-glazed timber windows with white double-glazed uPVC units (sash to front; casement to rear and sides),…
Rear wrap around single storey extension
Proposed ground floor wraparound extension, floor plan redesign and all associated works at 59 Ansdell Road, SE15 2DT
Construction of a rear and side dormer extension, construction of crown roof, 2no. rooflights to the side pitched roof and 2no. rooflight…
These are borough-wide. See the 5 nearest to your address.
Check your address freePermitted Development Rules
Enlargement, improvement or other alteration of a dwellinghouse
GPDO 2015, Schedule 2, Part 1, Class A
A wraparound extension combines a rear and side extension. It's assessed under Part 1, Class A of the GPDO and must comply with the limits for both rear depth and side width.
Key dimension limits
These are the maximum GPDO limits for a detached house with no constraints. Your actual limits depend on your property type, location, and any planning restrictions.
Enter your postcode to see the personalised limits for your wraparound extension.
Check my limitsTypical Costs in London
Wraparound extensions cost more than a simple rear or side extension due to the larger footprint and more complex structural requirements.
Cost per m²
construction rate
Typical total
Based on 20–30 m²
Typically includes
Typically excludes
Combines rear and side extension. Costs at the higher end due to larger footprint and structural complexity.
Get a personalised cost estimate based on your actual wraparound extension dimensions.
Get my estimateWhich Professionals Do You Need?
Wraparound extensions have complex geometry with multiple roof junctions and typically benefit from professional design input.
You'll need a party wall surveyor for this project.
Wraparound extensions have complex geometry with multiple roof junctions that benefit from professional design.
Typical fee: £2,000–£5,000 (Plans + Building Regs)
Single storey extensions typically need structural calculations for any openings in existing walls and for foundations.
Typical fee: £500–£1,500
Your semi-detached house shares a boundary with neighbours. Extensions and loft work within 3 metres of a shared wall trigger the Party Wall Act.
Typical fee: £700–£1,500 (per neighbour)
This guidance is based on a typical semi-detached house with no special constraints. Listed buildings, conservation areas, and attached properties may require additional professional input.
Find out exactly which professionals you need for your wraparound extension.
Get personalised guidanceConservation Areas & Listed Buildings
In conservation areas, the side element of a wraparound extension is not permitted development. The rear element is limited to 3 metres depth.
Properties in conservation areas often have reduced permitted development rights. Some project types (like side extensions) lose PD rights entirely. An Article 4 Direction can remove additional PD rights.
Listed buildings (Grade I, II*, or II) have no permitted development rights at all. Any external alteration requires Listed Building Consent in addition to any planning permission. An architect experienced in heritage work is essential.
Check if your property is in a conservation area or has other planning constraints.
Check my propertyFrequently Asked Questions
Just want a quick yes/no for your wraparound extension?
Run our free 2-minute check to see whether your project likely qualifies as permitted development in Southwark — your address, your constraints, your council's own recent decisions.
Free 2-min check