Do I need planning permission for a porch in Merton?

Usually not, as long as it's under 3m², under 3m high, and at least 2m from the highway. Listed buildings are the exception — they always need consent.

How much does a porch cost?

A porch in London typically costs between £5,000 and £15,000, depending on materials. A simple UPVC porch is at the low end, a brick-built porch with a tiled roof at the higher end.

What is the maximum size for a porch under permitted development?

The maximum ground floor area is 3 square metres, with a maximum height of 3 metres.

Do I need Building Regulations approval for a porch?

In most cases, no. Porches are usually exempt from Building Regulations provided they are at ground level, under 30m², and have glazed walls.

Project guideGPDO Class D

Porch in Merton: Planning Permission Guide

Everything you need to know about building a porch in Merton — PD rules, costs, and when you need planning permission.

87%

approved in Merton

£548

application fee

8 wks

typical decision

≤3 m²

PD porch size

Based on 23 decided applications in Merton over 24 months (20 granted, 3 refused).

Merton has conservation areas including Wimbledon Village, Wimbledon Common, Mitcham Cricket Green, and Cannizaro Park. Listed buildings cluster around Wimbledon Common and Merton Abbey Mills. Wimbledon Common is Metropolitan Common Land with its own byelaws near the edges. Article 4 Directions cover parts of Wimbledon Village. The borough has a mix of affluent Edwardian housing around Wimbledon and Victorian terrace stock in Mitcham and Colliers Wood.

Council planning portal Pre-application advice

Local data PD rules Costs Professionals Constraints FAQs

Will yours qualify?

Free 2-minute check for your Merton address.

Run my free check

Personalised odds

5 nearest comparables & refusal reasons for your address.

Get my report — £9 See a sample →

Recent porch decisions in Merton

The 5 most recent decided applications. Addresses redacted to postcode area.

Issue Certificate of Lawfulness

APPLICATION FOR A LAWFUL DEVELOPMENT CERTIFICATE IN RESPECT OF THE PROPOSED ERECTION OF A FRONT PORCH, REPLACING METAL FENCE GATE FIXING …

SW192026-06-07

Granted

ERECTION OF A NEW OPEN SIDED PORCH TO FRONT ELEVATION FACING PARKSIDE AVENUE.

SW192026-05-24

Granted

EXTERNAL WALL INSULATION TO ALL EXISTING WALLS; REPLACE ALL EXISTING WINDOWS’ REMOVAL OF REAR CHIMNEY STACK; REMOVAL OF SOME EXISTING AN…

SW192026-04-26

Granted

LISTED BUILDING CONSENT FOR THE INSTALLATION OF SLIMLINE HERITAGE DOUBLE-GLAZED TIMBER WINDOWS AND MINOR IMPROVEMENT WORKS TO PORCH FLOOR…

SW192026-01-12

Granted

ERECTION OF A SINGLE STOREY PORCH TO FRONT ELEVATION.

SW202026-01-12

These are borough-wide. See the 5 nearest to your address.

Get my report — £9

Permitted Development Rules

Class DPart 1

Porches

GPDO 2015, Schedule 2, Part 1, Class D

Porches are covered by Part 1, Class D of the GPDO. They have simple, clear rules: stay under 3 square metres, under 3 metres high, and at least 2 metres from the highway.

Key dimension limits

Max 3m² footprintMax 3m heightMin 2m from highway

These are the maximum GPDO limits for a detached house with no constraints. Your actual limits depend on your property type, location, and any planning restrictions.

Enter your postcode to see the personalised limits for your porch.

Check my limits

Typical Costs in London

Porches are one of the more affordable home improvements, with costs depending mainly on materials and design.

PorchLondon

Cost per m²

£1,800–£3,000

construction rate

Typical total

£5,000–£15,000

Based on 2–4 m²

Typically includes

FoundationsStructureRoofDoorBasic finishes

Typically excludes

Planning application feeBuilding regs fee

Costs depend heavily on materials and finish — a simple UPVC porch is at the low end, brick-built with tiled roof at the high end.

Get a personalised cost estimate based on your actual porch dimensions.

Get my estimate

Which Professionals Do You Need?

Porches are relatively simple structures. In most cases, a builder can handle the project without needing an architect.

A draughtsperson or architectural technician can prepare any drawings needed. A full architect may not be necessary.

Architect / designerOptional

Porches are simple structures. A builder or draughtsperson can usually prepare any drawings needed.

Typical fee: £500–£1,500 (Basic drawings)

Structural engineerNot needed

Party wall surveyorOptional

May apply if the work is within 3 metres of a shared boundary. Check with your builder.

Typical fee: £700–£1,500 (per neighbour (if applicable))

Planning consultantNot needed

This guidance is based on a typical semi-detached house with no special constraints. Listed buildings, conservation areas, and attached properties may require additional professional input.

Find out exactly which professionals you need for your porch.

Get personalised guidance

Conservation Areas & Listed Buildings

In conservation areas, the same PD rules apply to porches, but you should use materials sympathetic to the area character.

Conservation areas

Properties in conservation areas often have reduced permitted development rights. Some project types (like side extensions) lose PD rights entirely. An Article 4 Direction can remove additional PD rights.

Listed buildings

Listed buildings (Grade I, II*, or II) have no permitted development rights at all. Any external alteration requires Listed Building Consent in addition to any planning permission. An architect experienced in heritage work is essential.

Check if your property is in a conservation area or has other planning constraints.

Check my property

Frequently Asked Questions

Just want a quick yes/no for your porch?

Run our free 2-minute check to see whether your project likely qualifies as permitted development in Merton. For personalised approval odds and nearby comparables, get the £9 report.

Free 2-min check

Related guides

Windows & doors

Driveway

Fence, wall or gate

GPDO Class A (Part 2)

All guides