Fence, wall or gate in Melton: Planning Permission Guide
Your guide to fences, walls, and gates in Melton — height limits, permitted development rules, and costs.
Check if your fence, wall or gate qualifiesFence, wall or gates in Melton at a glance
application fee
weeks typical
718 listed buildings recorded.
Want your personalised odds?
Approval probability, 5 nearest comparables, refusal reasons — for your specific address.
Recent fence, wall or gate decisions in Melton
The 5 most recent decided applications. Addresses redacted to postcode area.
T1 - Sycamore - fell - as it stands on the boundary there is a wall that drops down to the property underneath the canopy of the tree. Cl…
Adjustments to landscaping and boundary treatments
T1 Cotinus reducing to growth points (where possible) to alleviate light issues in gardenT2 Horsechestnut felled to ground level as is gr…
Eleven hormbeams, planted as a hedge against the boundary, but now grown out.The proposal is to pollard the trees.
T1 Variegated Holly reduced to approx. 10 ft in height and sides trimmed in to look presentableT2 Large green Holly reduced to approx. 12…
These are borough-wide. See the 5 nearest to your address.
Get my report — £9Permitted Development Rules
Gates, fences, walls or other means of enclosure
GPDO 2015, Schedule 2, Part 2, Class A
Fences, walls, and gates are covered by Part 2, Class A of the GPDO. The main consideration is height: up to 1 metre next to a highway, up to 2 metres elsewhere.
Key dimension limits
These are the maximum GPDO limits for a detached house with no constraints. Your actual limits depend on your property type, location, and any planning restrictions.
Enter your postcode to see the personalised limits for your fence, wall or gate.
Check my limitsTypical Costs in East Midlands
Boundary treatment costs depend on the length, material, and type — timber fencing is cheapest, brick walls are the most expensive.
Typical total
Typically includes
Typically excludes
Timber fencing is cheapest. Brick walls and metal railings cost significantly more per metre.
Get a personalised cost estimate based on your actual fence, wall or gate dimensions.
Get my estimateWhich Professionals Do You Need?
Boundary treatments rarely need professional services beyond a competent builder or fencing contractor.
This project is unlikely to need specialist professional services beyond a competent builder.
This type of project does not typically require architectural services.
This guidance is based on a typical semi-detached house with no special constraints. Listed buildings, conservation areas, and attached properties may require additional professional input.
Find out exactly which professionals you need for your fence, wall or gate.
Get personalised guidanceConservation Areas & Listed Buildings
In conservation areas, the same height rules apply, but you should consider materials that are sympathetic to the area character. Some Article 4 Directions restrict boundary treatments.
Properties in conservation areas often have reduced permitted development rights. Some project types (like side extensions) lose PD rights entirely. An Article 4 Direction can remove additional PD rights.
Listed buildings (Grade I, II*, or II) have no permitted development rights at all. Any external alteration requires Listed Building Consent in addition to any planning permission. An architect experienced in heritage work is essential.
Check if your property is in a conservation area or has other planning constraints.
Check my propertyFrequently Asked Questions
Just want a quick yes/no for your fence, wall or gate?
Run our free 2-minute check to see whether your project likely qualifies as permitted development in Melton. For personalised approval odds and nearby comparables, get the full report above.
Free 2-min check