Fence, wall or gate in Hart: Planning Permission Guide
Your guide to fences, walls, and gates in Hart — height limits, permitted development rules, and costs.
Based on 38 decided applications in Hart over 36 months (30 granted, 8 refused).
Hart has 39 conservation areas — extensive heritage coverage restricting external alterations across many streets. 47 Article 4 directions affect specific streets. 1,901 listed buildings recorded.
Recent fence, wall or gate decisions in Hart
The 5 most recent decided applications. Addresses redacted to postcode area.
Demolition of retaining wall and replacement retaining wall
Partial removal of the entrance wall
Erection of a rolling gate for the driveway and pedestrian access gate
Installation of new automated inward opening driveway gates and entry keypad on matching piers / posts to existing driveway
Replace clay wall tiles with render
These are borough-wide. See the 5 nearest to your address.
Check your address freePermitted Development Rules
Gates, fences, walls or other means of enclosure
GPDO 2015, Schedule 2, Part 2, Class A
Fences, walls, and gates are covered by Part 2, Class A of the GPDO. The main consideration is height: up to 1 metre next to a highway, up to 2 metres elsewhere.
Key dimension limits
These are the maximum GPDO limits for a detached house with no constraints. Your actual limits depend on your property type, location, and any planning restrictions.
Enter your postcode to see the personalised limits for your fence, wall or gate.
Check my limitsTypical Costs in South East England
Boundary treatment costs depend on the length, material, and type — timber fencing is cheapest, brick walls are the most expensive.
Typical total
Typically includes
Typically excludes
Timber fencing is cheapest. Brick walls and metal railings cost significantly more per metre.
Get a personalised cost estimate based on your actual fence, wall or gate dimensions.
Get my estimateWhich Professionals Do You Need?
Boundary treatments rarely need professional services beyond a competent builder or fencing contractor.
This project is unlikely to need specialist professional services beyond a competent builder.
This type of project does not typically require architectural services.
This guidance is based on a typical semi-detached house with no special constraints. Listed buildings, conservation areas, and attached properties may require additional professional input.
Find out exactly which professionals you need for your fence, wall or gate.
Get personalised guidanceConservation Areas & Listed Buildings
In conservation areas, the same height rules apply, but you should consider materials that are sympathetic to the area character. Some Article 4 Directions restrict boundary treatments.
Properties in conservation areas often have reduced permitted development rights. Some project types (like side extensions) lose PD rights entirely. An Article 4 Direction can remove additional PD rights.
Listed buildings (Grade I, II*, or II) have no permitted development rights at all. Any external alteration requires Listed Building Consent in addition to any planning permission. An architect experienced in heritage work is essential.
Check if your property is in a conservation area or has other planning constraints.
Check my propertyFrequently Asked Questions
Just want a quick yes/no for your fence, wall or gate?
Run our free 2-minute check to see whether your project likely qualifies as permitted development in Hart — your address, your constraints, your council's own recent decisions.
Free 2-min check