Fence, wall or gate in Derbyshire Dales: Planning Permission Guide

Your guide to fences, walls, and gates in Derbyshire Dales — height limits, permitted development rules, and costs.

Check if your fence, wall or gate qualifies

Fence, wall or gates in Derbyshire Dales at a glance

£548

application fee

8

weeks typical

Derbyshire Dales borders or partially overlaps Peak District National Park and the Derwent Valley Mills World Heritage Site — properties near those boundaries are on Article 1(5) land where permitted-development rights are restricted. Derbyshire Dales has 33 conservation areas — extensive heritage coverage restricting external alterations across many streets. 2,322 listed buildings recorded.

Want your personalised odds?

Approval probability, 5 nearest comparables, refusal reasons — for your specific address.

Recent fence, wall or gate decisions in Derbyshire Dales

The 5 most recent decided applications. Addresses redacted to postcode area.

Not Available

Erection of timber fence to front boundary and landscaping works

DE42026-05-20
Not Available

Installation of a breathable, capillary-active internal wall insulation

DE42026-05-18
Not Available

Replacement of all existing external doors and windows, installation built-in wardrobes, furniture, including wall panelling to a bedroom…

DE62026-05-11
Not Available

Discharge of Conditions 3, 4, 5, 6 and 7 of application 24/00330/FUL - Extension to patio and car park, installation of hardstandings, ex…

DE62026-05-05
Not Available

Erection of 1.8m perimeter fence (retrospective)

DE42026-04-28

These are borough-wide. See the 5 nearest to your address.

Get my report — £9

Permitted Development Rules

Class A (Part 2)Part 2

Gates, fences, walls or other means of enclosure

GPDO 2015, Schedule 2, Part 2, Class A

Fences, walls, and gates are covered by Part 2, Class A of the GPDO. The main consideration is height: up to 1 metre next to a highway, up to 2 metres elsewhere.

Key dimension limits

Max 1m adjacent to highwayMax 2m elsewhere

These are the maximum GPDO limits for a detached house with no constraints. Your actual limits depend on your property type, location, and any planning restrictions.

Enter your postcode to see the personalised limits for your fence, wall or gate.

Check my limits

Typical Costs in West Midlands

Boundary treatment costs depend on the length, material, and type — timber fencing is cheapest, brick walls are the most expensive.

Fence, wall or gateWest Midlands

Typical total

£800£3,900

Typically includes

MaterialsInstallationFoundations (for walls)

Typically excludes

Planning application fee

Timber fencing is cheapest. Brick walls and metal railings cost significantly more per metre.

Get a personalised cost estimate based on your actual fence, wall or gate dimensions.

Get my estimate

Which Professionals Do You Need?

Boundary treatments rarely need professional services beyond a competent builder or fencing contractor.

This project is unlikely to need specialist professional services beyond a competent builder.

Architect / designerNot needed

This type of project does not typically require architectural services.

Structural engineerNot needed
Party wall surveyorNot needed
Planning consultantNot needed

This guidance is based on a typical semi-detached house with no special constraints. Listed buildings, conservation areas, and attached properties may require additional professional input.

Find out exactly which professionals you need for your fence, wall or gate.

Get personalised guidance

Conservation Areas & Listed Buildings

In conservation areas, the same height rules apply, but you should consider materials that are sympathetic to the area character. Some Article 4 Directions restrict boundary treatments.

Conservation areas

Properties in conservation areas often have reduced permitted development rights. Some project types (like side extensions) lose PD rights entirely. An Article 4 Direction can remove additional PD rights.

Listed buildings

Listed buildings (Grade I, II*, or II) have no permitted development rights at all. Any external alteration requires Listed Building Consent in addition to any planning permission. An architect experienced in heritage work is essential.

Check if your property is in a conservation area or has other planning constraints.

Check my property

Frequently Asked Questions

Just want a quick yes/no for your fence, wall or gate?

Run our free 2-minute check to see whether your project likely qualifies as permitted development in Derbyshire Dales. For personalised approval odds and nearby comparables, get the full report above.

Free 2-min check