How high can a fence be without planning permission?

Up to 1 metre if adjacent to a highway used by vehicles. Up to 2 metres elsewhere. These are the GPDO maximums.

Do I need planning permission for a garden wall?

Not if the wall is under 2 metres high (or 1 metre adjacent to a highway). Higher walls, or walls in areas with Article 4 Directions, need planning permission.

How much does fencing cost?

Boundary treatment costs in London typically range between £1,000 and £5,000, depending on length and materials. Timber fencing is cheapest, brick walls and metal railings cost significantly more.

Can I replace an existing fence with a taller one?

Yes, provided the replacement stays within the PD height limits (1m by highway, 2m elsewhere). The previous height is not relevant — it's the new height that matters.

Project guideGPDO Class A (Part 2)

Fence, wall or gate in Croydon: Planning Permission Guide

Your guide to fences, walls, and gates in Croydon — height limits, permitted development rules, and costs.

83%

approved in Croydon

£548

application fee

8 wks

typical decision

1–2m

PD height

Based on 58 decided applications in Croydon over 12 months (48 granted, 10 refused).

Croydon is a large and diverse south London borough with conservation areas around Croydon Minster, Addington Village, Coulsdon, South Norwood, and Waddon. The south of the borough borders Green Belt and the Surrey Hills AONB (National Landscape), triggering Article 2(3) designated land rules in the Biggin Hill and Kenley fringe. Article 4 Directions restrict specific rights in some conservation areas including parts of Shirley, Coulsdon, and Upper Norwood. Flood zones apply along the Wandle valley.

Council planning portal Pre-application advice

Local data PD rules Costs Professionals Constraints FAQs

Will yours qualify?

Free 2-minute check for your Croydon address.

Run my free check

Recent fence, wall or gate decisions in Croydon

The 5 most recent decided applications. Addresses redacted to postcode area.

Withdrawn

T1 Pine - Fell. It has caused substantial damage to the driveway which is a health hazard, causing people to trip and cause potential inj…

CR22026-07-30

Granted

Alterations, installation of emergency generator and fuel tank fronting Crossland Road surrounded by 2.4m high galvanised steel palisad…

CR72026-07-30

Granted

Erection of new boundary perimeter fencing and widening of principal access

CR02026-07-07

Granted

T1 Cypress - Fell due to drain damage and damage to boundary wall. (TPO 09, 1974)

CR02026-07-03

Granted

T1 Holly - To reduce in height by 3-4m and radius by 1.5m. T2 Yew - To reduce in height by 2m and radius by 1-1.5m. Clients reasons: They…

CR82026-07-03

These are borough-wide. See the 5 nearest to your address.

Check your address free

Permitted Development Rules

Class A (Part 2)Part 2

Gates, fences, walls or other means of enclosure

GPDO 2015, Schedule 2, Part 2, Class A

Fences, walls, and gates are covered by Part 2, Class A of the GPDO. The main consideration is height: up to 1 metre next to a highway, up to 2 metres elsewhere.

Key dimension limits

Max 1m adjacent to highwayMax 2m elsewhere

These are the maximum GPDO limits for a detached house with no constraints. Your actual limits depend on your property type, location, and any planning restrictions.

Enter your postcode to see the personalised limits for your fence, wall or gate.

Check my limits

Typical Costs in London

Boundary treatment costs depend on the length, material, and type — timber fencing is cheapest, brick walls are the most expensive.

Fence, wall or gateLondon

Typical total

£1,000–£5,000

Typically includes

MaterialsInstallationFoundations (for walls)

Typically excludes

Planning application fee

Timber fencing is cheapest. Brick walls and metal railings cost significantly more per metre.

Get a personalised cost estimate based on your actual fence, wall or gate dimensions.

Get my estimate

Which Professionals Do You Need?

Boundary treatments rarely need professional services beyond a competent builder or fencing contractor.

This project is unlikely to need specialist professional services beyond a competent builder.

Architect / designerNot needed

This type of project does not typically require architectural services.

Structural engineerNot needed

Party wall surveyorNot needed

Planning consultantNot needed

This guidance is based on a typical semi-detached house with no special constraints. Listed buildings, conservation areas, and attached properties may require additional professional input.

Find out exactly which professionals you need for your fence, wall or gate.

Get personalised guidance

Conservation Areas & Listed Buildings

In conservation areas, the same height rules apply, but you should consider materials that are sympathetic to the area character. Some Article 4 Directions restrict boundary treatments.

Conservation areas

Properties in conservation areas often have reduced permitted development rights. Some project types (like side extensions) lose PD rights entirely. An Article 4 Direction can remove additional PD rights.

Listed buildings

Listed buildings (Grade I, II*, or II) have no permitted development rights at all. Any external alteration requires Listed Building Consent in addition to any planning permission. An architect experienced in heritage work is essential.

Check if your property is in a conservation area or has other planning constraints.

Check my property

Frequently Asked Questions

Just want a quick yes/no for your fence, wall or gate?

Run our free 2-minute check to see whether your project likely qualifies as permitted development in Croydon — your address, your constraints, your council's own recent decisions.

Free 2-min check

Related guides

Driveway

Porch

GPDO Class D

Outbuilding / garden building

GPDO Class E

All guides