Fence, wall or gate in Bury: Planning Permission Guide
Your guide to fences, walls, and gates in Bury — height limits, permitted development rules, and costs.
Based on 24 decided applications in Bury over 12 months (14 granted, 10 refused).
Bury has conservation areas including Bury Town Centre, Ramsbottom, Prestwich, and Radcliffe. Listed buildings are concentrated around the 19th-century textile heritage of Ramsbottom and around Bury Parish Church. The West Pennine Moors cover parts of the north of the borough, adding constraints on elevated land. The Irwell Valley has flood zone considerations along the river. The borough has a mix of Victorian mill town terraces and later suburban housing.
Recent fence, wall or gate decisions in Bury
The 5 most recent decided applications. Addresses redacted to postcode area.
Erection of 1.83m high boundary fence/gate along property boundary on Grants Lane
Erection of 1.5m high boundary fence at front/side
rendering of existing front boundary wall; installation of 2no. electric gates and pedestrian gate
Installation of electric sliding entrance gates and 1.8M high replacement dark grey composite fencing at front/side
Creation of new driveway, wall and ramped access to the side elevation
These are borough-wide. See the 5 nearest to your address.
Check your address freePermitted Development Rules
Gates, fences, walls or other means of enclosure
GPDO 2015, Schedule 2, Part 2, Class A
Fences, walls, and gates are covered by Part 2, Class A of the GPDO. The main consideration is height: up to 1 metre next to a highway, up to 2 metres elsewhere.
Key dimension limits
These are the maximum GPDO limits for a detached house with no constraints. Your actual limits depend on your property type, location, and any planning restrictions.
Enter your postcode to see the personalised limits for your fence, wall or gate.
Check my limitsTypical Costs in Greater Manchester
Boundary treatment costs depend on the length, material, and type — timber fencing is cheapest, brick walls are the most expensive.
Typical total
Typically includes
Typically excludes
Timber fencing is cheapest. Brick walls and metal railings cost significantly more per metre.
Get a personalised cost estimate based on your actual fence, wall or gate dimensions.
Get my estimateWhich Professionals Do You Need?
Boundary treatments rarely need professional services beyond a competent builder or fencing contractor.
This project is unlikely to need specialist professional services beyond a competent builder.
This type of project does not typically require architectural services.
This guidance is based on a typical semi-detached house with no special constraints. Listed buildings, conservation areas, and attached properties may require additional professional input.
Find out exactly which professionals you need for your fence, wall or gate.
Get personalised guidanceConservation Areas & Listed Buildings
In conservation areas, the same height rules apply, but you should consider materials that are sympathetic to the area character. Some Article 4 Directions restrict boundary treatments.
Properties in conservation areas often have reduced permitted development rights. Some project types (like side extensions) lose PD rights entirely. An Article 4 Direction can remove additional PD rights.
Listed buildings (Grade I, II*, or II) have no permitted development rights at all. Any external alteration requires Listed Building Consent in addition to any planning permission. An architect experienced in heritage work is essential.
Check if your property is in a conservation area or has other planning constraints.
Check my propertyFrequently Asked Questions
Just want a quick yes/no for your fence, wall or gate?
Run our free 2-minute check to see whether your project likely qualifies as permitted development in Bury — your address, your constraints, your council's own recent decisions.
Free 2-min check